K100 / KS100 Accessories

KlassikDrain K100 / KS100 Accessories

K1 UNIVERSAL END CAP

End Cap/Closing Inlet-Outlet Cap

Fits all channels. Manufactured from gray ABS to complement edge rail. Guides aid cutting to correct height. 4″ bell end connection (K100), 4″ and 6″ bell end connection (K200), 6″ and 8″ bell end connection (K300) to Schedule 40 pipe. Seal using PVC-ABS cement.

K1 Inlet Cap

Schedule 40 6″ Inlet/Outlet Caps

For K100 and KS100 only. Polymer concrete end cap complete with a galvanized or stainless steel edge rail. A 6″ Sch 40 connector is cast into the polymer concrete end cap. Inlet caps connect to female end of channel, outlet caps connect to male end of channel.

Oval to Schedule 40

Oval to Schedule 40 6″ Pipe

Oval to round polypropylene adapter for bottom drill-out on 4″ polymer concrete channels. Schedule 40 6″ plain end can be solvent welded to underground pipe system. Seal to channel using appropriate flexible sealant.

ACO FOUL AIR TRAP

Foul Air Trap (FAT)

A polypropylene foul air trap (FAT) fits into the front or side of in-line catch basins. The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.

ACO INSTALLATION DEVICE

Installation Device

Installation devices are used to align channels to create a complete trench run. Once the installation is complete using these devices the concrete is poured around the device and channels. Installation devices allow a single concrete pour.

VERTICAL OUTLET STRAINER

Vertical Outlet Strainer

Strainer for 4” vertical outlets, prevents large particles of debris from flowing into underground pipe system and causing blockages (1. Flexible prongs fit inside schedule 40 4” pipe. 2. Lip on both sides hangs strainer from base of channel).