Types of Embed Frames
E-Z Pour Frames
Grating Pacific E-Z Pour frames are designed to expedite the forming process and provide superior concrete embedment.
Assembled with continuous anchors on the non-bearing sides, E-Z Pour frames install quickly and provide superior drainage. When specifying, indicate the clear opening dimensions, “W” (width) and “S” (span).
Nail holes are optional and must be specified if desired.
Welded Frames
All frames are available in four-sided, one-piece, welded construction units that can accommodate any clear opening. Various frame sections (illustrated below) provide assorted options for edge protection.
Simply specify the desired frame section, clear opening (“W” and “S” dimensions), and desired grating or cover thickness.
Nail holes are optional and must be specified if desired.
Anchors
All frames are provided with standard 3/8″ x 4″ headed concrete stud anchors welded within 6″ of each end and at a maximum of 24″ on center. Alternative anchor sizes and spacings may be specified.
Materials & Finishes
Carbon steel frames are manufactured with one of three standard finishes, bare steel (no finish), painted, or hot dip galvanized, after fabrication. Aluminum frames are provided mill finish and can be specified with bituminous coating on surfaces to be cast in concrete. Stainless steel frames are supplied mill finish and can be specified as abrasive blasted after fabrication to provide a uniform matte finish.
