PowerDrain Products & Features
PowerDrain S100K Accessories
End Cap/Closing Inlet-Outlet Cap
Fits all channels. Manufactured from gray ABS to complement edge rail. Guides aid cutting to correct height. 4″ bell end connection (S100K), 4″ and 6″ bell end connection (S200K), 6″ and 8″ bell end connection (S300K) to Schedule 40 pipe. Seal using PVC-ABS cement.
Schedule 40 6″ Inlet/Outlet Caps
For S100K only. Polymer concrete end cap complete with a galvanized or stainless steel edge rail. A 6″ Schedule 40 connector is cast into the polymer concrete end cap. Inlet caps connect to female end of channel, outlet caps connect to male end of channel.
Oval to Schedule 40 6″ Pipe
Oval to round polypropylene adapter for bottom drill-out on 4″ polymer concrete channels. Schedule 40 6″ plain end can be solvent welded to underground pipe system. Seal to channel using appropriate flexible sealant.
Foul Air Trap (FAT)
A polypropylene foul air trap (FAT) fits into the front or side of in-line catch basins. The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
Installation Device
Installation devices are used to align channels to create a complete trench run. Once the installation is complete using these devices the concrete is poured around the device and channels. Installation devices allow a single concrete pour.
Vertical Outlet Strainer
Strainer for 4” vertical outlets, prevents large particles of debris from flowing into underground pipe system and causing blockages (1. Flexible prongs fit inside schedule 40 4” pipe. 2. Lip on both sides hangs strainer from base of channel).